BCND family catalyst is a new generation high-efficiency
polypropylene catalyst and has proprietary intellectual property
This family catalyst has three kinds of catalyst, they are BCND-I,
BCND-II, and BCND-III. Different catalyst has a different hydrogen
1)New type internal donor technology is used, and DNBP compound is
2)High activity, it is more than 60,000g PP/g Cat.(Condition: 51
reactor, polymerization temperature is 70℃, reacted time is 2
hours, distributed pressure of H2 is 0.2MPa.)
3)Good isotacticity and adjustable.
4)Broaden molecular weight distribution, and the polymer has a good
5)The polymer has a good morphology and fewer fines.
6)Different hydrogen responsibility can be supplied.
This kind of catalyst can be used in Hypol, Novolen, Unipol,
Innovene and spheripol process, and can produce homo-polymer,
impact copolymer and random copolymer.
BCND family catalysts have a high activity and broaden molecular
weight distribution, and can be used to produce PPR, BOPP, high MFR
injection molding polymer. The polymer has a good comprehensive
performance and machining performance.
BCND family catalyst has a good co-polymerization performance, and
distribution of ethylene chain is homogeneous. When produce random
co-polymer, we can get lower melting point PP or more transparent
PP in the same ethylene content. When produce impact co-polymer, we
can produce PP which contain higher rubber content in the same
Packaging. Storage and Transport
Packaging can be supplied in dry catalyst or oil catalyst.
Dry catalyst packaging: BCND dry catalyst is packaged in
zinc-plated steel drums under nitrogen protection, and contains
40kgs or 80kgs every drum.
Oil catalyst packaging: Dry catalyst is mixed proportionally with
white oil. The mixture is under nitrogen blanket special drums. In
transportation, the catalyst should be handled carefully avoiding
bumping, opening of cover or contacting with air. It should be
stored in a dry, clean and ventilated space out of direct sunlight.
Notice before being used:
The catalyst should be laid under the environment with the
temperature about 15℃ more than 24hours, and roll the drum more
than 24 hours before being used.